Fix Electric Stove: Simple Steps to Get Your Cooktop Working Again

Got an electric stove that’s acting up? You’re not alone – burners die, elements quit heating, and control knobs go wonky more often than we’d like. The good news? Many of these hiccups are easy to diagnose and fix without waiting for a technician.

Common Reasons an Electric Stove Stops Working

First, figure out what’s actually broken. Most electric stoves fail for one of three reasons:

• Power supply issues. A tripped breaker or a loose plug can make the whole unit look dead.
• Faulty heating elements. If a burner stays cold while others work, that element is probably burned out.
• Control board or thermostat problems. Modern stoves use electronic controls; a bad board can stop one or more burners from heating.

Knowing which category your problem falls into saves a lot of time. Start by checking the obvious – is the stove getting power?

DIY Fixes You Can Try Today

1. Reset the breaker. Open your fuse box, locate the circuit labeled “kitchen” or “stove,” and flip it off then on. If that restores power, you’ve solved it.

2. Inspect the plug and cord. Look for frayed wires or a loose connection. Unplug the stove, pull the cord out of the wall, and give it a gentle wiggle. If it’s loose, tighten the screw or replace the plug.

3. Test the heating element. Remove the burner coil (usually a simple twist‑off). Use a multimeter set to continuity – touch the probes to the element’s terminals. No beep? The element is dead and needs swapping. Replacement parts are cheap and fit most standard models.

4. Clean the burner contacts. Over time, food crumbs and grease can build up where the coil meets the socket. Turn the stove off, remove the coil, and wipe the contacts with a damp cloth. Dry them thoroughly before re‑installing.

5. Check the control board. If only one burner is dead but the rest work, the issue may be a blown fuse on the board. Many boards have a small, replaceable fuse that looks like a glass bulb. Turn off power at the breaker, locate the board (usually behind the back panel), and swap the fuse if it looks blackened.

Safety first: always disconnect power before opening any part of the stove. If you’re uncomfortable working with electricity, stop here and call a professional.

When DIY stops being practical, Glastonbury Appliance Repair Services can step in. Our technicians know every make and model, can diagnose hidden faults, and usually get the job done within a few hours. We charge a fair call‑out fee and give you a clear estimate before any work starts.

Bottom line: most electric stove problems are either a power issue, a bad element, or a control glitch. Run through the quick checks above, and you’ll often have a working stove again in under an hour. If not, a local pro will have the expertise and tools to sort it out without breaking the bank.

Got a stubborn stove that won’t budge? Give us a shout – we’re just around the corner and happy to help you get back to cooking fast.